415F2 Industrial Loader Machine Systems Fuel Tank - Remove and Install Caterpillar


Fuel Tank - Remove and Install
`
415F2 Industrial Loader Machine Systems [M0067024]
FUEL SYSTEM
LINES GP-FUEL
415F2 Industrial Loader Machine Systems Fuel Tank - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
1U-7505  Hydraulic Jack 

  1. Refer to Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain" and Operation and Maintenance Manual, "Capacities (Refill)" for the correct draining and filling procedures.


    Illustration 1g06028641

  2. Remove panels (1) and (2).


    Illustration 2g06028752

  3. Remove panel (3).


    Illustration 3g06028758


    Illustration 4g06028773

  4. Disconnect bracket assembly (4).

  5. Disconnect harness assembly (5). Disconnect hoses (6) from fuel tank assembly (7).


    Illustration 5g06028786


    Illustration 6g06028792

  6. Place Tooling (A) under fuel tank assembly (7). The weight of fuel tank assembly (7) is approximately 80 kg (176 lb). Remove bolts (8) and remove fuel tank assembly (7).

Installation Procedure

  1. Install fuel tank assembly (7) in the reverse order of removal.

Information System:

415F2 Industrial Loader Machine Systems Air Conditioner and Heater - Remove and Install
320D2 GC Excavator Engine Supplement Hydraulic Oil Cooler - Remove and Install
Replacement Procedure for the Return Hose Assemblies on Certain 308E2 Excavators {5057, 5068}
320D2 GC Excavator Engine Supplement Radiator - Remove and Install
320D2 GC Excavator Engine Supplement Radiator and Hydraulic Oil Cooler - Remove and Install
An Improved Air Conditioning Compressor Is Used On Certain Wheeled Excavators {1152, 1802}
Improved Software is Available to Re-Flash the Monitor Software for Certain 307E2 Tier 4 Final Mini Hydraulic Excavators {7490, 7601, 7603, 7610, 7620}
An Improved Routing is Now Used for the Pilot Hose on Certain 336D2 and 340D2 Excavators {5057, 5059}
GSV520 and GSV525 Orange Peel Grapples Head Assembly and Bushing - Remove and Install
816K Landfill Compactor Transmission Magnetic Screen - Clean
C9.3 Tier 4 Final Engines Cylinder Head Valves
415F2 Industrial Loader Machine Systems Refrigerant Accumulator - Remove and Install
307E2 Mini Hydraulic Excavator Machine Systems Refueling Pump - Remove and Install
Installing the <NOBR>387-6451</NOBR> Ride Control Kit to a Machine That Has an ECM {5004}
Installing the <NOBR>387-6450</NOBR> Ride Control Kit to a Machine That Does Not Have an ECM {5004}
C9.3 Tier 4 Final Engines Fuel Injection Pump
C9.3 Tier 4 Final Engines Cylinder Head
GSV520 and GSV525 Orange Peel Grapples Rotator Motor and Manifold - Remove and Install
New Fuel Injection Pump Stop Solenoid is Available on Certain 3054C and C7.1 (Mech) Machine Engines {1251, 1259, 1264}
GSV520 and GSV525 Orange Peel Grapples Rotator Motor and Manifold - Disassemble
349D2 MHPU Mobile Hydraulic Power Unit Machine System Boom Cylinder Lines
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Rotator Motor and Manifold - Assemble
349D2 MHPU Mobile Hydraulic Power Unit Machine System Swing Motor Lines
349D2 MHPU Mobile Hydraulic Power Unit Machine System Fuel Tank