415F2 Industrial Loader Power Train Drive Shaft (Rear) - Remove and Install Caterpillar


Drive Shaft (Rear) - Remove and Install
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
155-3597  Wheel Chock 


    Illustration 1g01116752

  1. Use Tooling (A) to block the tires. Remove bolts (1). Discard bolts (1).


    Illustration 2g06054945

  2. Remove bolts (3). Discard bolts (3). Remove rear drive shaft (2).

Installation Procedure

  1. Install rear drive shaft (2) in the reverse order of removal.

    1. Install new bolts (1) and (3). Tighten bolts (1) and (3) to a torque of 28 ± 7 N·m (248 ± 62 lb in).

Information System:

415F2 Industrial Loader Power Train Drive Shaft (Front) - Remove and Install
GSV520 and GSV525 Orange Peel Grapples Hydraulic Rotator - Remove and Install
Technical Analysis 1 (TA1) Visual Inspection for Hydraulic Hammers {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
349D2 MHPU Mobile Hydraulic Power Unit Machine System Swing Gear and Bearing
415F2 Industrial Loader Power Train Transmission (Direct Drive) - Install
330F MHPU Mobile Hydraulic Power Unit Engine Oil and Filter - Change
415F2 Industrial Loader Power Train Transmission (Direct Drive) - Assemble
325F Excavator Machine Systems Fuel Tank - Remove and Install
415F2 Industrial Loader Power Train Transmission (Direct Drive) - Disassemble
325F Excavator Engine Supplement Engine - Remove and Install
415F2 Industrial Loader Power Train Transmission (Direct Drive) - Remove
349D2 MHPU Mobile Hydraulic Power Unit Machine System Track
415F2 Industrial Loader Power Train Tie Rod (Steering)(Front) - Remove and Install
415F2 Industrial Loader Power Train Final Drive Planetary - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Maintenance Interval Schedule
Similar Product Support Literature Available For Military Machines {0374, 1000, 7000}
415F2 Industrial Loader Power Train Axle Housing and Flange - Remove
415F2 Industrial Loader Power Train Final Drive Planetary - Remove and Install - Front
304.5E XTC Mini Hydraulic Excavators Machine Systems Pilot Valve (Joystick) - Remove and Install
Installation Procedure to Retrofit a Boom Lowering Control Valve on Certain 325D Forestry Machines {5057, 5147, 5811}
415F2 Industrial Loader Power Train Axle Housing and Flange - Disassemble
415F2 Industrial Loader Power Train Axle Housing and Flange - Assemble
415F2 Industrial Loader Power Train Axle Housing and Flange - Install