415F2 Industrial Loader Power Train Axle Housing and Flange - Disassemble Caterpillar


Axle Housing and Flange - Disassemble
`
1.1. Disassembly Procedure

Disassembly Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
1P-0510  Driver Gp 
1P-0520  Driver Gp 

Start By:

  1. Remove the axle housing and the wheel flange.


    Illustration 1g01023873

  1. Remove retaining ring (1) and ring gear hub (2) from ring gear (3).


    Illustration 2g01023874

  2. Remove seal (4) from wheel flange (7). Use Tooling (B) and a suitable hammer to remove bearing cup (5). Remove spacer (6). Use Tooling (B) and a suitable hammer to remove bearing cup (8).


    Illustration 3g01023875

  3. Remove bearing cone (9) and seal (10) from pin assembly (11). Repeat for the other pin assembly.


    Illustration 4g01023881

  4. Remove seal (12) from knuckle (13).


    Illustration 5g01038749

  5. Remove bearing cone (14) from knuckle (13).


    Illustration 6g01023876

  6. Use Tooling (A) and a suitable hammer to remove the bushing from knuckle (13).

Information System:

Installation Procedure to Retrofit a Boom Lowering Control Valve on Certain 325D Forestry Machines {5057, 5147, 5811}
304.5E XTC Mini Hydraulic Excavators Machine Systems Pilot Valve (Joystick) - Remove and Install
415F2 Industrial Loader Power Train Final Drive Planetary - Remove and Install - Front
415F2 Industrial Loader Power Train Axle Housing and Flange - Remove
Similar Product Support Literature Available For Military Machines {0374, 1000, 7000}
330F MHPU Mobile Hydraulic Power Unit Maintenance Interval Schedule
415F2 Industrial Loader Power Train Final Drive Planetary - Remove and Install
415F2 Industrial Loader Power Train Tie Rod (Steering)(Front) - Remove and Install
349D2 MHPU Mobile Hydraulic Power Unit Machine System Track
415F2 Industrial Loader Power Train Drive Shaft (Rear) - Remove and Install
415F2 Industrial Loader Power Train Drive Shaft (Front) - Remove and Install
GSV520 and GSV525 Orange Peel Grapples Hydraulic Rotator - Remove and Install
415F2 Industrial Loader Power Train Axle Housing and Flange - Assemble
415F2 Industrial Loader Power Train Axle Housing and Flange - Install
415F2 Industrial Loader Power Train Axle Shaft - Remove and Install
Installation Procedure to Retrofit a Boom Lowering Control Valve on Certain 568 LL Forestry Machines {1329, 1439, 1916, 1917, 1923, 1924, 5001, 5117, 5130, 5264, 5453}
A New Fuel Injection Pump Group is Used on Certain C9.3 Machine Engines {1251}
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Swivel - Disassemble
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Swivel - Assemble
345D, 349D and 349D2 Excavator Machine System Specifications Control Valve
GSV520 and GSV525 Orange Peel Grapples Shell Assembly - Remove and Install
325F Excavator Machine Systems Heating and Air Conditioning Unit - Remove and Install
Installation of the <NOBR>492-1508</NOBR> Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5258, 7405, 7557}
Installation of the <NOBR>327-7487</NOBR> Foot Pedal Gp on Certain Hydraulic Excavators {5258}