Hydraulic Lockout Control - Remove and Install
`
336D 2L and 340D 2L Excavators Machine Systems
[M0065626]
336D 2L and 340D 2L Excavators Machine Systems
Fuel Tank - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems
Window Wiper Motor - Remove and Install - Lower
OPERATOR STATION
CONTROL GP-HYDRAULIC
315C Excavator Machine Systems
Pilot Valve (Travel) - Disassemble
336D 2L and 340D 2L Excavators Machine Systems
Hydraulic Lockout Control - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems
Pilot Valve (Travel) - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems
Pilot Valve (Travel) - Assemble
1.1. Removal Procedure
2.1. Installation Procedure
- Remove screws (2) and panel (1).
Show/hide table
Illustration 2 g01278781 - Remove screws (6). Cut cable strap (8) and place switch (7) aside.
- Remove screws (4), (5), and hydraulic lockout control (3).
Show/hide table
![]() | |
Illustration 1 | g01187398 |
- Install hydraulic lockout control (3), screws (4), and (5). Tighten screws (4) and (5) to a torque of
3.0 ± 0.5 N·m (26.6 ± 4.4 lb in) . - Position switch (7) and install screws (6). Tighten screws (6) to a torque of
0.7 ± 0.1 N·m (6.2 ± 0.9 lb in) . Attach cable strap (8).Show/hide tableIllustration 4 g01187398 - Install panel (1) and screws (2).
Show/hide table
![]() | |
Illustration 3 | g01278781 |
Information System:
352F Mobile Hydraulic Power Unit (MHPU) Machine System
Main Hydraulic System
New Rear Axle and Brake Control Groups Are Now Used On Certain 424B Backhoe Loaders {3278, 3282, 4269}
Improved Hoses Are Now Used on Certain Backhoe Loaders {5057}
336D 2L and 340D 2L Excavators Machine Systems
Fuel Tank - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems
Cab - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems
Evaporator Coil - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems
Heater Core - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems
Heating and Air Conditioning Unit - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems
Swing Gear and Bearing - Remove and Install
301.7D CR Mini Hydraulic Excavator
Track Adjustment - Inspect
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems
Control Valve and Mounting
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems
Track Roller (Single Flange)
336D 2L and 340D 2L Excavators Machine Systems
Window Wiper Motor - Remove and Install - Lower
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples
Head Assembly and Bushing - Remove and Install
349F and 352F Excavators
Joystick Controls - Cat Grade With Assist System
314F and 315F Excavators Machine System Specifications
Control Valve (Auxiliary)
An Improved Main Control Valve is Now Used on 308E2 CR and 308E2 SR Mini Hydraulic Excavators {5051}
314F and 315F Excavators Machine System Specifications
Chassis Lighting
349F and 352F Excavators
Monitoring System - Monitor with Installed Cat Grade With Assist
307 Hydraulic Excavator Engine Supplement
Refrigerant Compressor - Remove and Install
924K, 926M, 930K, 930M, 938K, and 938M Wheel Loaders Machine System
Pilot Pressure - Check
Installation of the <NOBR>487-5000</NOBR> Auxiliary Hydraulic Lines Gp on Certain Hydraulic Excavators {5057}
DFS118, DFS121 and DFS124 Silage Defacers
Safety Messages
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples
Rotator Motor and Manifold - Remove and Install