336D 2L and 340D 2L Excavators Machine Systems Window Wiper Motor - Remove and Install - Lower Caterpillar


Window Wiper Motor - Remove and Install - Lower
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure



    Illustration 1g06028342

  1. Remove bolts (1) and sheet assembly (2).


    Illustration 2g06028349

  2. Remove nut (5), wiper arm assembly (6) and hose (4) . Remove cover (3).


    Illustration 3g06028346

  3. Disconnect harness assembly (7). Remove bolts (8) and bracket assembly (9).


    Illustration 4g06028350

  4. Remove screws (9) and wiper motor (11) from bracket assembly (10).

Installation Procedure



    Illustration 5g06028350

  1. Install wiper motor (11) onto bracket assembly (10) and install screws (9).


    Illustration 6g06028346

  2. Install bracket assembly (9) using bolts (8). Tighten bolts (8) to a torque of 55 ± 10 N·m (41 ± 7 lb ft). Connect harness assembly (7).


    Illustration 7g06028349

  3. Install cover (3) and install wiper arm assembly (6) using nut (5). Connect hose (4).


    Illustration 8g06028342

  4. Install sheet assembly (2) using bolts (1).

Information System:

336D 2L and 340D 2L Excavators Machine Systems Hydraulic Lockout Control - Remove and Install
352F Mobile Hydraulic Power Unit (MHPU) Machine System Main Hydraulic System
New Rear Axle and Brake Control Groups Are Now Used On Certain 424B Backhoe Loaders {3278, 3282, 4269}
Improved Hoses Are Now Used on Certain Backhoe Loaders {5057}
336D 2L and 340D 2L Excavators Machine Systems Fuel Tank - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Cab - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Evaporator Coil - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Heater Core - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Heating and Air Conditioning Unit - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Swing Gear and Bearing - Remove and Install
301.7D CR Mini Hydraulic Excavator Track Adjustment - Inspect
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Valve and Mounting
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Head Assembly and Bushing - Remove and Install
349F and 352F Excavators Joystick Controls - Cat Grade With Assist System
314F and 315F Excavators Machine System Specifications Control Valve (Auxiliary)
An Improved Main Control Valve is Now Used on 308E2 CR and 308E2 SR Mini Hydraulic Excavators {5051}
314F and 315F Excavators Machine System Specifications Chassis Lighting
349F and 352F Excavators Monitoring System - Monitor with Installed Cat Grade With Assist
307 Hydraulic Excavator Engine Supplement Refrigerant Compressor - Remove and Install
924K, 926M, 930K, 930M, 938K, and 938M Wheel Loaders Machine System Pilot Pressure - Check
Installation of the <NOBR>487-5000</NOBR> Auxiliary Hydraulic Lines Gp on Certain Hydraulic Excavators {5057}
DFS118, DFS121 and DFS124 Silage Defacers Safety Messages
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Rotator Motor and Manifold - Remove and Install
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Rotator Motor and Manifold - Disassemble