312C Excavator 3064 Engine Supplement Turbocharger - Install Caterpillar


Turbocharger - Install
`
312C Excavator 3064 Engine Supplement [RENR5507]
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
312C Excavator 3064 Engine Supplement Turbocharger - Install
1.1. Installation Procedure

Installation Procedure

Note: Check all gaskets for wear or for damage. Replace the gaskets, if necessary.

Note: Put 5P-3931 Anti-Seize Compound on the threads of all studs.


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.



NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "AVSpare Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on AVSpare products.

Dispose of all fluids according to local regulations and mandates.





    Illustration 1g00811342

  1. Inspect the gasket, and replace the gasket, if necessary. Position the flange for the turbine housing on the exhaust manifold, and install eight nuts (7) on the studs.

  1. Slide exhaust pipe onto the studs, and install six nuts (6) .

  1. Position the clamp, and tighten bolts (5) .



    Illustration 2g00811341

  1. Connect oil drain line (3) to the cartridge assembly. Connect the oil supply line (1) to the cartridge assembly.

  1. Slide hoses (4) onto the compressor housing, and tighten clamps (2) .

Information System:

320C U Excavator Securing the Machine
325C and 325C L Excavator Engine and Machine Warm-Up
325C Excavator Engine Starting with Ether Starting Aid - If Equipped
325C and 325C L Excavator Hydraulic Lockout Control
312C Excavator 3064 Engine Supplement Air Inlet Heater - Remove and Install
325C and 325C L Excavator Engine Starting
3046 Engine for Caterpillar Built Machines Fuel Injection Nozzle - Test
W345B Series II Material Handler Machine System Specifications Wiring (Battery)
312C Excavator 3064 Engine Supplement Radiator - Install
325C and 325C L Excavator Window (Front)
325C and 325C L Excavator Air Conditioning and Heating Control - If Equipped
320C and 322C Forest Machines Hydraulic System Travel Hydraulic System
2002/05/06 New High Temperature Buffer Seals Reduce Oil Leakage From Hydraulic Cylinders {7562}
325C and 325C L Excavator Engine Oil Level - Check
3064 and 3066 Engines for Caterpillar Built Machines Fuel Injection Timing - Check
325C and 325C L Excavator Engine Oil and Filter - Change
325C and 325C L Excavator Fuel System Filter - Replace
325C Excavator Fuses - Replace
Starting Motor Solenoid - Replace {1467}
325C and 325C L Excavator Hydraulic System Oil Filter (Case Drain) - Replace
325C and 325C L Excavator Hydraulic System Oil Filter (Pilot) - Replace
3064 and 3066 Engines for Caterpillar Built Machines Low Idle RPM - Adjust
HDB Series and M1 Series Heavy Duty Brushless Alternators General Information
312C Excavator 3064 Engine Supplement Air Cleaner - Remove and Install