312C Excavator 3064 Engine Supplement Water Pump - Install Caterpillar


Water Pump - Install
`
312C Excavator 3064 Engine Supplement [RENR5507]
COOLING SYSTEM
PUMP GP-WATER
312C Excavator 3064 Engine Supplement Water Pump - Remove
312C Excavator 3064 Engine Supplement Water Pump - Install
1.1. Installation Procedure

Installation Procedure

Note: Check all of the seals for wear and for damage. Replace seals, if necessary.


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "AVSpare Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on AVSpare products.

Dispose of all fluids according to local regulations and mandates.



NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


------ WARNING! ------

Climbing equipment may be required to access this service point. Refer to the Operation and Maintenance Manual, "Mounting and Dismounting" topic for safety information.

----------------------



    Illustration 1g00812158

  1. Install a new gasket. Place water pump (4) in position on the engine. Secure the water pump with bolts (3) .



    Illustration 2g00812160

  1. Place water pump pulley (2) in position on the water pump. Secure the water pump pulley with bolts (1) .

  1. Fill the cooling system with coolant. Refer to Operation and Maintenance, SEBU7424-01, "Cooling System Coolant (ELC) - Change".

End By:

  1. Install the V-belts. Refer to Disassembly and Assembly Manual, "V-Belts - Remove and Install".
  2. Install the fan. Refer to Disassembly and Assembly Manual, "Fan - Remove and Install".

Information System:

312C Excavator 3064 Engine Supplement Water Pump - Remove
2001/07/30 Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
3500B Engines Electronic Control Terms
5230B Excavator Electronic Systems Guide Vital Information Management System (VIMS)
3500B Engines for 5130B and 5230B Excavators System Overview
3064 and 3066 Engines for Caterpillar Built Machines Cooling System - Test
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
3064 and 3066 Engines for Caterpillar Built Machines Engine Oil Pressure - Test
3064 and 3066 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
HDB Series and M1 Series Heavy Duty Brushless Alternators Normal Operation
312C Excavator 3064 Engine Supplement Air Cleaner - Remove and Install
HDB Series and M1 Series Heavy Duty Brushless Alternators General Information
Quick Coupler Wedge Lock(Wheel Loader) Safety Signs and Labels
3500B Engines for 5130B and 5230B Excavators Electrical Connectors and Functions
Horizontal Pin Lock Series PW Quick Coupler Safety Messages
3500B Engines for 5130B and 5230B Excavators Engine Misfires, Runs Rough or Is Unstable
312C Excavator 3064 Engine Supplement Water Separator - Remove and Install
305 CR Mini Hydraulic Excavator Monitoring System
W345B Series II Material Handler Hydraulic System Stick Hydraulic System
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Language Selection
5230B Excavator Hydraulic System Relief Valve (Main) - Test
312C Excavator 3064 Engine Supplement Air Conditioner Dryer - Remove and Install
W345B Series II Material Handler Hydraulic System Control Valve (Stick Lowering)
312C Excavator 3064 Engine Supplement Fuel Priming Pump - Remove and Install