Fuel Tank - Remove
`
312C Excavator Machine Systems
[RENR7476]
312C Excavator Machine Systems
Accumulator - Remove and Install
312C Excavator Machine Systems
Fuel Tank - Install
FUEL SYSTEM
TANK GP-FUEL
312C Excavator Machine Systems
Fuel Tank - Remove
312C Excavator Machine Systems
Fuel Tank - Install
1.1. Removal Procedure
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Link Bracket | 4 |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Remove plate assembly (1).
Show/hide table
Illustration 2 g00828908 - Remove hood covers (2) and (3).
Show/hide table
Illustration 3 g00822987 - Disconnect harness assembly (4) from the fuel level sensor and cut cable strap (5).
Show/hide table
Illustration 4 g00823041 - Remove bolts (6) and move the solenoid valve group away from the fuel tank.
Show/hide table
Illustration 5 g00823048 - Disconnect harness assemblies (7) and (8). Cut cable straps (9).
Show/hide table
Illustration 6 g00802754 - Remove storage box cover (10) and the vandalism guards from the storage box.
Show/hide table
Illustration 7 g00802787 - Remove bolt assembly (11) and bolts (12) and (13). Remove the storage box.
Show/hide table
Illustration 8 g00802833 - Remove bolts (14) and cover (15).
Show/hide table
Illustration 9 g00802863 - Remove bolts (16), bracket (18), and sleeves (17).
Show/hide table
Illustration 10 g01004136 - Remove nut (19) and clip (20). Loosen clamp (21) and remove the hose from the fuel tank.
Show/hide table
Illustration 11 g00802874 - Remove the bolts that fasten door assembly (22) to the machine.
Show/hide table
Illustration 12 g00802915 - Close valve assembly (23) for the fuel supply hose. Loosen clamp (24) and remove the hose from the valve assembly. Remove nut (25) and clip (26).
Show/hide table
Illustration 13 g01013233 Show/hide tableIllustration 14 g00802931 - Attach Tooling (A) and a suitable lifting device to fuel tank (29).
- Remove bolts (27) and spacers (28) which secure fuel tank (29) to the excavator.
- Remove fuel tank (29). The weight of fuel tank (29) is approximately
99 kg (218 lb) .
Show/hide table
![]() | |
Illustration 1 | g00822953 |
Information System:
Procedure to Reinforce the Frame Assembly Stabilizer{7222}
325D and 329D Excavators and 325D Material Handler Machine System Specifications
Fasteners - Swing Drive and Final Drive
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Engine Temperature Sensor Open or Short Circuit - Test
312C Excavator Machine Systems
Accumulator - Remove and Install
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM
Attachment Code - Configure
5230B Excavator Vital Information Management System (VIMS)
Service Operations
5230B Excavator Vital Information Management System (VIMS)
Normal Operation
5230B Excavator Vital Information Management System (VIMS)
General Information
C-9 Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators
Shipping the Machine
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Lifting and Tying Down the Machine
312C Excavator Machine Systems
Shuttle Valve - Install - Auxiliary Control
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Swing Lock Pin Control
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - HDB Series Alternator
312C Excavator Machine Systems
Fuel Tank - Install
305 CR Mini Hydraulic Excavator
Access Door and Cover Locations
312C Excavator Machine Systems
Tank and Filter (Hydraulic) - Remove
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Disassemble - HDB Series Alternator
305 CR Mini Hydraulic Excavator
Capacities (Refill)
330B Excavator Machine System Specifications
Track Carrier Roller
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Sound Information and Vibration Information
312C and 312C L Excavator
Plate Locations and Film Locations
305 CR Mini Hydraulic Excavator
Belt - Inspect/Adjust/Replace
2001/10/15
A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}