312C Excavator Machine Systems Fuel Tank - Install Caterpillar


Fuel Tank - Install
`
312C Excavator Machine Systems [RENR7476]
FUEL SYSTEM
TANK GP-FUEL
312C Excavator Machine Systems Fuel Tank - Remove
312C Excavator Machine Systems Fuel Tank - Install
1.1. Installation Procedure

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
138-7573  Link Bracket 


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01013233


    Illustration 2g00802931

  1. Attach Tooling (A) and a suitable lifting device to fuel tank (29). The weight of fuel tank (29) is approximately 99 kg (218 lb). Position fuel tank (29) on the excavator.

  2. Install spacers (28) and bolts (27) in order to secure fuel tank (29) to the excavator.


    Illustration 3g00802915

  3. Install the fuel supply hose on valve assembly (23). Tighten hose clamp (24). Install clip (26) and nut (25).


    Illustration 4g00802874

  4. Install door assembly (22). Install the bolts that secure door assembly (22) to the excavator.


    Illustration 5g01004136

  5. Install the hose on the fuel tank and tighten hose clamp (21). Install clip (20) and nut (19).


    Illustration 6g00802863

  6. Install sleeves (17), bracket (18), and bolts (16).


    Illustration 7g00802833

  7. Install cover (15) and bolts (14).


    Illustration 8g00802787

  8. Install the storage box. Install bolts (13) and (12) and bolt assembly (11).


    Illustration 9g00802754

  9. Place the vandalism guards in the storage box and install storage box cover (10).


    Illustration 10g00823048

  10. Connect harness assemblies (7) and (8). Install cable straps (9).


    Illustration 11g00823041

  11. Position the solenoid valve and install bolts (6).


    Illustration 12g00822987

  12. Connect harness assembly (4) to the fuel level sensor and install cable strap (5).


    Illustration 13g00828908

  13. Install hood covers (3) and (2).


    Illustration 14g00822953

  14. Install plate (1).

Information System:

HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Assemble - HDB Series Alternator
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Swing Lock Pin Control
312C Excavator Machine Systems Fuel Tank - Remove
Procedure to Reinforce the Frame Assembly Stabilizer{7222}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Fasteners - Swing Drive and Final Drive
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Temperature Sensor Open or Short Circuit - Test
312C Excavator Machine Systems Accumulator - Remove and Install
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM Attachment Code - Configure
5230B Excavator Vital Information Management System (VIMS) Service Operations
5230B Excavator Vital Information Management System (VIMS) Normal Operation
5230B Excavator Vital Information Management System (VIMS) General Information
C-9 Engine for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
305 CR Mini Hydraulic Excavator Access Door and Cover Locations
312C Excavator Machine Systems Tank and Filter (Hydraulic) - Remove
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Disassemble - HDB Series Alternator
305 CR Mini Hydraulic Excavator Capacities (Refill)
330B Excavator Machine System Specifications Track Carrier Roller
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Sound Information and Vibration Information
312C and 312C L Excavator Plate Locations and Film Locations
305 CR Mini Hydraulic Excavator Belt - Inspect/Adjust/Replace
2001/10/15 A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}
420D and 430D Backhoe Loaders Quick Coupler Control (Loader) - If Equipped
420D and 430D Backhoe Loaders Quick Coupler Operation (Loader)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Quick Coupler Operation (Backhoe) - Pin Grabber Quick Coupler (If Equipped)