Fan Guard - Remove and Install - Aftercooler
`
M318C Wheeled Excavator Engine Supplement
[RENR6674]
M318C Wheeled Excavator Engine Supplement
Muffler - Remove and Install - Engine in Chassis
M318C Wheeled Excavator Engine Supplement
Water Pump - Remove and Install - Engine in Chassis
COOLING SYSTEM
FAN GP
M318C Wheeled Excavator Engine Supplement
Fan Guard - Remove and Install - Aftercooler
M318C Wheeled Excavator Engine Supplement
Fan Guard - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Removal Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "AVSpare Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on AVSpare products. Dispose of all fluids according to local regulations and mandates. |
- Open the hood above the engine.
- Open the side panel next to the engine.
- Loosen clamps (1) and remove hose (2) .
Show/hide table
 | |
| Illustration 1 | g00910068 |
- Remove bolts (3) and remove top fan guard (4) .
- Remove bolts (5) and remove bottom fan guard (6) .
Note: Bottom fan guard (6) must be removed from the top.
Show/hide table
 | |
| Illustration 2 | g00910069 |
Installation Procedure
- Position bottom fan guard (6) .
Show/hide table
| | |
| Illustration 3 | g00910069 |
- Install bolts (5) .
- Position top fan guard (4) .
Show/hide table
| | |
| Illustration 4 | g00910068 |
- Install bolts (3) .
- Install hose (2) .
- Tighten clamps (1) .
Information System:
M315C Wheeled Hydraulic Excavator Machine System
Stick - 2.6 m (8.53 ft)
M316C Wheeled Excavator Machine System
Stick - 2400 mm (7.9 ft)
2002/10/28
New XT-6 ES Hoses are Available {5057, 5102}
M316C Wheeled Excavator Machine System
Stick - 2100 mm (6.9 ft)
320C, 322C and 325C Excavators Tool Control System
Switches
322C Forest Machine Machine Systems
Expansion Valve - Remove and Install
M318C Excavator Machine Systems
Check Valve (Drift Reduction) - Remove
308C Excavator Machine Systems
Main Control Valve - Remove
322C Excavator Hydraulic System
Medium Pressure Hydraulic System
308C Excavator Machine Systems
Boom - Install
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Analog Sensor Supply Circuit - Test
Service Procedure for the Hydraulic Cylinder on Hydraulic Pin Grabber Quick Couplers{5362, 6129}
320C Material Handler
Lifting Capacities
308C Excavator Machine Systems
Hydraulic Oil Tank - Remove
308C Excavator Machine Systems
Hydraulic Oil Tank - Install
M318C and M322C Excavators Engine Supplement
Engine Oil Cooler - Remove and Install
320C Excavator
Leaving the Machine
2002/08/26
New Cab Mounts Improve Stability and Controllability {7301}
M318C Excavator Machine Systems
Steering Cylinder - Disassemble
M318C and M322C Excavators Machine Systems
Steering Cylinder - Assemble
308C Excavator Machine Systems
Main Control Valve - Install
3064 and 3066 Engines for Caterpillar Built Machines
Fuel Injection Nozzle - Test
322C Forest Machine Machine Systems
Control Valve (Auxiliary) - Assemble
315D, 318D and 319D Excavators Machine Systems
Main Hydraulic Pump - Assemble