VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Speed Control - Remove and Install Caterpillar


Speed Control - Remove and Install
`
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers [KENR7892]
OPERATOR STATION
AIR CONDITIONER GP
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Speed Control - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

------ WARNING! ------

At operating temperature, the hydraulic oil is hot and under pressure. Hot oils can cause burns.

To prevent possible personal injury, release the pressure in the work tool hydraulic circuit (boom, stick, bucket, and swing), travel circuits, and the hydraulic oil tank at the filler cap before any hydraulic lines or components are disconnected or removed.

Remove the filler cap only when the engine is stopped and the filler cap is cool enough to touch.

----------------------


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before operating any compartment or disassembling any component containing fluids.

After collecting all fluids in suitable containers, dispose of all fluids according to local regulations and mandates.





    Illustration 1g02011293

  1. Remove bolts (1). Use two people to remove speed control valve (2). The weight of speed control valve (2) is approximately 18 kg (40 lb).

Installation Procedure

  1. Install speed control valve (2) in the reverse order as the removal.

Information System:

VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Swivel - Disassemble
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Gerotor Motor - Disassemble
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Gerotor Motor - Assemble
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Swivel - Assemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Engine and Main Hydraulic Pump - Remove and Install
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Hydraulic Rotator and Hydraulic Crusher Housing - Separate
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Speed Control Valve - Disassemble
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Hydraulic Cylinder - Remove and Install
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Hydraulic Cylinder - Remove and Install
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Swivel - Remove and Install
2010/04/30 A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
C9.3 Tier 4 Final Engines Diesel Particulate Filter Has Changed Regeneration Interval
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Hydraulic Cylinder - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Stick Cylinder - Remove and Install
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Crusher Tooth - Remove and Install
349E Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Ripper Tooth - Remove and Install
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Fuel Filter and Water Separator Base - Remove and Install
317-7492 Wireless Radio{7338}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Muffler - Remove and Install
Procedure to Install <NOBR>214-3287</NOBR> Drain Lines Group on Certain C, D, E, F, and Next Generation Series Excavators {0679, 5057}
374D Excavator Machine System Specifications Bucket Linkage - VB Family