VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Crusher Tooth - Remove and Install Caterpillar


Crusher Tooth - Remove and Install
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     200-2959  (1)     Shear Lock Gp     1    
A     200-2960  (2)     Shear Lock Gp     1    
A     200-2885  (3)     Shear Lock Gp     1    
A     200-2961  (4)     Shear Lock Gp     1    
( 1 ) For use with VHC-30
( 2 ) For use with VHC-40
( 3 ) For use with VHC-50
( 4 ) For use with VHC-60

  1. Position the work tool on suitable cribbing that is on a hard, level surface.

  1. Use the hydraulic system on the host machine to open the jaw.



    Illustration 1g02023110

  1. Attach Tooling (A) to cover assembly (1) behind guide block (2) in order to secure the jaw open.



    Illustration 2g02097293

  1. Remove tooth (3) from the jaw.

  1. Repeat Step 4 for each tooth.

Installation Procedure

  1. Clean all parts and inspect all parts. If any parts are worn or damaged, use new parts for replacement.

  1. Install tooth (3) in the reverse order as the removal.

Information System:

336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Stick Cylinder - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Hydraulic Cylinder - Remove and Install
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Speed Control - Remove and Install
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Swivel - Disassemble
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Gerotor Motor - Disassemble
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Gerotor Motor - Assemble
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Swivel - Assemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Engine and Main Hydraulic Pump - Remove and Install
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Hydraulic Rotator and Hydraulic Crusher Housing - Separate
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Speed Control Valve - Disassemble
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Hydraulic Cylinder - Remove and Install
349E Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Ripper Tooth - Remove and Install
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Fuel Filter and Water Separator Base - Remove and Install
317-7492 Wireless Radio{7338}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Muffler - Remove and Install
Procedure to Install <NOBR>214-3287</NOBR> Drain Lines Group on Certain C, D, E, F, and Next Generation Series Excavators {0679, 5057}
374D Excavator Machine System Specifications Bucket Linkage - VB Family
C4.4 Industrial Engine Air Compressor - Twin Cylinder Compressor
C4.4 Industrial Engine Air Compressor - Single Cylinder
568 Forest Machine Hydraulic System Swing Speed and Swing Drift on a Slope - Check
568 Forest Machine Hydraulic System Cylinder Drift - Check - Loaded Bucket/Heel