303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Fuel Filter and Water Separator Base - Remove and Install Caterpillar


Fuel Filter and Water Separator Base - Remove and Install
`
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement [UENR0101]
FUEL SYSTEM
FILTER GP-FUEL
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Fuel Filter and Water Separator Base - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     QTY    
A     185-3630     Strap Wrench As     1    


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.

Dispose of all fluids according to local regulations and mandates.


  1. Open the side hood.



    Illustration 1g02148318

  1. Drain sediment bowl (5). Refer to Operation and Maintenance Manual, "Fuel System Water Separator - Drain".

  1. Use Tooling (A) in order to remove fuel filter assembly (4) and sediment bowl (5) .

  1. Disconnect hose assemblies (2). Remove bolts (1) and filter base assembly (3) .

Installation Procedure




    Illustration 2g02148318

  1. Position filter base assembly (3) and install bolts (1). Connect hose assemblies (2) .

  1. Install fuel filter assembly (4) and sediment bowl (5) .

  1. Prime the fuel system. Refer to Operation and Maintenance Manual, "Fuel System - Prime".

Information System:

VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Ripper Tooth - Remove and Install
349E Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Crusher Tooth - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Stick Cylinder - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Hydraulic Cylinder - Remove and Install
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Speed Control - Remove and Install
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Swivel - Disassemble
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Gerotor Motor - Disassemble
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Gerotor Motor - Assemble
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Swivel - Assemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Engine and Main Hydraulic Pump - Remove and Install
317-7492 Wireless Radio{7338}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Muffler - Remove and Install
Procedure to Install <NOBR>214-3287</NOBR> Drain Lines Group on Certain C, D, E, F, and Next Generation Series Excavators {0679, 5057}
374D Excavator Machine System Specifications Bucket Linkage - VB Family
C4.4 Industrial Engine Air Compressor - Twin Cylinder Compressor
C4.4 Industrial Engine Air Compressor - Single Cylinder
568 Forest Machine Hydraulic System Swing Speed and Swing Drift on a Slope - Check
568 Forest Machine Hydraulic System Cylinder Drift - Check - Loaded Bucket/Heel
C9.3 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C13 Engines for Caterpillar Built Machines Turbocharger - Inspect
2010/04/29 The Frame of the Center Lock Pin Grabber Quick Coupler was Redesigned for Certain Excavators {6129}