EPC Parts Catalogs

303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Fan - Remove and Install Caterpillar


  1. Home
  2. Disassembly and Assembly
  3. #81727
Fan - Remove and Install
`
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement [UENR0101]
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Engine Oil Cooler - Remove and Install
COOLING SYSTEM
FAN GP
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Fan - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Start By:

  1. Remove the radiator. Refer to, "Radiator - Remove and Install".
    Show/hide table

    Illustration 1g01223334

  1. Remove bolts (2) and remove fan (1) .
    Show/hide table

    Illustration 2g01223354

  1. Remove adapter (4) and pulley (3) .

Installation Procedure

    Show/hide table

    Illustration 3g01223354

  1. Install pulley (3) and adapter (4) .
    Show/hide table

    Illustration 4g01223334

  1. Position fan (1) and install bolts (2) .

End By: Install the radiator. Refer to, "Radiator - Remove and Install".

Information System:

303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Fuel Shutoff Solenoid - Remove and Install
C4.4 Industrial Engine Position the Valve Mechanism Before Maintenance Procedures
C7.1 Industrial Engine Position the Valve Mechanism Before Maintenance Procedures
C6.6 Industrial Engine Fuel Injection Pump Gear - Remove
C6.6 Industrial Engine Fuel Injection Pump - Install
C6.6 Industrial Engine Fuel Injection Pump - Remove
C6.6 Industrial Engine Inlet Air Control - Install - NRS Inlet Air Mixer
C6.6 Industrial Engine Inlet Air Control - Remove - NRS Inlet Air Mixer
C6.6 Industrial Engine Fuel Injection Lines - Install
C6.6 Industrial Engine Fuel Injection Lines - Remove
C6.6 Industrial Engine Fuel Manifold (Rail) - Remove and Install
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Engine Oil Cooler - Remove and Install
303.5E2 CR, 304E2 CR, 305.5E2 CR and 305E2 CR Mini Hydraulic Excavators Engine Supplement Hood - Remove and Install
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Refrigerant Condenser - Remove and Install
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Water Temperature Regulator - Remove and Install
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Refrigerant Compressor - Remove and Install
2010/05/17 The Relay Switch for the Heater has been Relocated to Improve the Reliability of the Switch on Certain Excavators {1417}
303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Refrigerant Receiver-Dryer - Remove and Install
349E Excavator Hydraulic System Gear Pump (Pilot) - Test
2010/04/30 The Pin Assembly and Pin Retention Is Improved on Certain Bucket Arrangements for the 385C Excavator {6068, 7562}
MP15, MP20, MP30 and MP40 Multi-Processors Transport Position
MP15, MP20, MP30 and MP40 Multi-Processors Shipping
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Stick Bearings and Seals - Remove and Install