EPC Parts Catalogs

303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Hydraulic Tank - Install Caterpillar


  1. Home
  2. Disassembly and Assembly
  3. #81920
Hydraulic Tank - Install
`
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems [UENR0102]
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Hydraulic Tank - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems System Pressure - Release
HYDRAULIC SYSTEM
TANK GP
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Hydraulic Tank - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Hydraulic Tank - Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Hydraulic Tank - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Hydraulic Tank - Install
1.1. Installation Procedure

Installation Procedure

Show/hide table
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Bracket     2    

Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.

    Show/hide table

    Illustration 1g01247147

  1. Attach Tooling (A) and a suitable lifting device to hydraulic tank (2). The weight of hydraulic tank (2) is approximately 57 kg (125 lb).
    Show/hide table

    Illustration 2g01247155

  1. Position hydraulic tank (2) .
    Show/hide table

    Illustration 3g01247154

  1. Connect hose (18). Access hose (18) on the inside of the cab.
    Show/hide table

    Illustration 4g01247152

  1. Install panel (17). Panel (17) is located in the cab.
    Show/hide table

    Illustration 5g01247150

  1. Close access door (16). Access door (16) is located in the cab.
    Show/hide table

    Illustration 6g01247145

  1. Install bolts (15) to hydraulic tank (2) .
    Show/hide table

    Illustration 7g01247144

  1. Install bolts (14) to hydraulic tank (2) .
    Show/hide table

    Illustration 8g01247143

  1. Install bolts (13) to hydraulic tank (2) .
    Show/hide table

    Illustration 9g01247142

  1. Install clamp (12) to hydraulic tank (2) .
    Show/hide table

    Illustration 10g01247140

  1. Connect hose assembly (11) to hydraulic tank (2) .
    Show/hide table

    Illustration 11g02164074

  1. Connect hose assemblies (10), (9), (8), and (7), and tube assembly (6) to hydraulic tank (2) .
    Show/hide table

    Illustration 12g02164073

  1. Install clamp (5) to hydraulic tank (2) .
    Show/hide table

    Illustration 13g01247137

  1. Install hinge assembly (4) to hydraulic tank (2) .
    Show/hide table

    Illustration 14g02162194

  1. Install cover assembly (3) .
    Show/hide table

    Illustration 15g01247132

  1. Install hood support (1) to hydraulic tank (2) .

End By: Install the main control valve. Refer to , "Main Control Valve - Install".

Information System:

303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Hydraulic Tank - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Counterweight - Remove and Install
C9.3 Engines for Caterpillar Built Machines Exhaust Sensor Lines - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Relief Valve (Medium Pressure Function) - Test and Adjust - Main
336D MHPU Mobile Hydraulic Power Unit Hydraulic System Relief Valve (Auxiliary) - Test and Adjust - Line, System 18
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Work Tool Parameter - Default Values - Medium Pressure
336D MHPU Mobile Hydraulic Power Unit Hydraulic System Work Tool Parameter - Default Values - System 18
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Upper Frame and Undercarriage Frame - Connect
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Upper Frame and Undercarriage Frame - Separate
324E Excavator Additional Messages
C4.4 Industrial Engine Air Inlet and Exhaust System - Single Turbocharger
324E Excavator Safety Messages
349F and 352F Excavators Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Cylinder) - Remove and Install
C9.3 Tier 4 Final Engines Fuel Filter Base - Primary
Installation Procedure for the 260-8007 Front Lines Group {5057}
324E Excavator Specifications
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Final Drive - Disassemble - Type-Two
C4.4 Industrial Engine Electrical System
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Cylinder) - Disassemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Cylinder) - Assemble
325D and 329D Excavators Joystick Controls Alternate Patterns
324E Excavator Capacities (Refill)