EPC Parts Catalogs

303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Cab - Install Caterpillar


  1. Home
  2. Disassembly and Assembly
  3. #82108
Cab - Install
`
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems [UENR0102]
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Cab - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Swivel - Remove
OPERATOR STATION
CAB GP
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Cab - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Cab - Install
1.1. Installation Procedure

Installation Procedure

Show/hide table
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     189-0410     Shackle As     2    
    Show/hide table

    Illustration 1g02162188
    Show/hide table

    Illustration 2g01227519

  1. Attach Tooling (A) and a suitable lifting device to cab (16). The weight of cab (16) is approximately 250 kg (550 lb).

  1. Install cab (16). Install bolts (17) that are located around the back of the operator seat and around the inside of cab. There are a total of 12 bolts that will be installed.
    Show/hide table

    Illustration 3g02161326

  1. Connect hose (15) that is located on the right front side of the cab for the window washer.
    Show/hide table

    Illustration 4g01227931

  1. Connect harness assembly (14) that is located behind the operator seat.
    Show/hide table

    Illustration 5g01227615

  1. Install shaft (12) and bolt (13) .
    Show/hide table

    Illustration 6g01227925

  1. Install guard (11) and bolt (10) .
    Show/hide table

    Illustration 7g02161324

  1. Install bolts (9) .
    Show/hide table

    Illustration 8g01227520

  1. Install duct (8) .
    Show/hide table

    Illustration 9g01227517

  1. Position bracket assembly (6) and install bolts (7) .
    Show/hide table

    Illustration 10g01227516

  1. Move cover (4) into position. Install bolts (3) and (5) .
    Show/hide table

    Illustration 11g01227514

  1. Install floor mat (2) and plate (1) .

End By: Install the heater and the air conditioning unit. Refer to , "Heater and Air Conditioning Unit - Install".

Information System:

303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Cab - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
2010/07/12 A New Water Separator Gp Is Used on Certain Mini Hydraulic Excavators {1261, 1274}
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems System Pressure - Release
Installation of the 267-8004 Auxiliary Control Wiring Gp {1408}
Cleaning Procedure After a Pump, Motor, or Cylinder Failure for Backhoe Loaders{5050, 7000}
C7.1 Industrial Engine Fuel Priming Pump - Remove and Install - Electric Fuel Lift Pump (EFLP)
C7.1 Industrial Engine Water Temperature Regulator - Remove and Install
C7.1 Industrial Engine Water Pump - Remove
C7.1 Industrial Engine Water Pump - Install
C7.1 Industrial Engine Wastegate Solenoid - Remove and Install
C7.1 Industrial Engine Vibration Damper and Pulley - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Swivel - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Swivel - Install
349F and 352F Excavators Machine System Pilot Valve (Swing Parking Brake)
349E Excavator Hydraulic System Relief Valve (Swing)
Cat Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks Proximity Indicator
Cat Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks Object Detection Sensor - Clean/Inspect
Cat Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks Regulatory Compliance
Cat Detect 12 Radar Object Detection System, Software Version 3 Safety
349E Excavator Hydraulic System Boom Drift Reduction Valve
349F and 352F Excavators Machine Systems Pilot Valve (Travel) - Remove and Install
C4.4 Industrial Engine Crankshaft
C7.1 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "B"