Swivel - Install
`
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
[UENR0102]
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Swivel - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Fuel Tank - Remove and Install
HYDRAULIC SYSTEM
SWIVEL GP
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Swivel - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Swivel - Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Swivel - Disassemble
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Swivel - Assemble
1.1. Installation Procedure
Installation Procedure
- Position swivel (2). Install bolts (11) .
Show/hide table
 | |
| Illustration 1 | g02156075 |
- Connect hose assemblies (10) to the sides of swivel (2) .
Show/hide table
 | |
| Illustration 2 | g02156074 |
- Install cover (9) .
Show/hide table
 | |
| Illustration 3 | g02156073 |
- Install bottom guard (8) .
Show/hide table
 | |
| Illustration 4 | g02155353 |
- Position lock plate (7) and install bolts (6) .
Show/hide table
 | |
| Illustration 5 | g02155352 |
Show/hide table
 | |
| Illustration 6 | g02155351 |
- Connect hose assemblies (5) to swivel (2) .
- Connect hose assemblies (3) to swing motor (4) .
Show/hide table
 | |
| Illustration 7 | g02157179 |
- Install fuel tank (1). Refer to, "Fuel Tank - Remove and Install".
Show/hide table
 | |
| Illustration 8 | g02157180 |
End By: Install the platform. Refer to , "Platform - Install".
Information System:
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Swivel - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Cab - Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Cab - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Accumulator (Hydraulic Pilot) - Remove and Install
2010/07/12
A New Water Separator Gp Is Used on Certain Mini Hydraulic Excavators {1261, 1274}
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
System Pressure - Release
Installation of the 267-8004 Auxiliary Control Wiring Gp {1408}
Cleaning Procedure After a Pump, Motor, or Cylinder Failure for Backhoe Loaders{5050, 7000}
C7.1 Industrial Engine
Fuel Priming Pump - Remove and Install - Electric Fuel Lift Pump (EFLP)
C7.1 Industrial Engine
Water Temperature Regulator - Remove and Install
C7.1 Industrial Engine
Water Pump - Remove
C7.1 Industrial Engine
Water Pump - Install
349F and 352F Excavators Machine System
Pilot Valve (Swing Parking Brake)
349E Excavator Hydraulic System
Relief Valve (Swing)
Cat Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks
Proximity Indicator
Cat Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks
Object Detection Sensor - Clean/Inspect
Cat Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks
Regulatory Compliance
Cat Detect 12 Radar Object Detection System, Software Version 3
Safety
349E Excavator Hydraulic System
Boom Drift Reduction Valve
349F and 352F Excavators Machine Systems
Pilot Valve (Travel) - Remove and Install
C4.4 Industrial Engine
Crankshaft
C7.1 Industrial Engine
Accessory Drive - Remove and Install - Accessory Drive SAE "B"
C7.1 Industrial Engine
Accessory Drive - Remove and Install - Accessory Drive SAE "A"
C7.1 Industrial Engine
Air Compressor - Remove and Install - Single Cylinder