Pressure Reducing Valve (Implement and Swing Priority) - Assemble
`
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
[KENR8157]
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Pressure Reducing Valve (Implement and Swing Priority) - Disassemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Remove and Install
HYDRAULIC SYSTEM
VALVE GP-PRESSURE REDUCING
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Pressure Reducing Valve (Implement and Swing Priority) - Disassemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Pressure Reducing Valve (Implement and Swing Priority) - Assemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Pressure Reducing Valve (Implement and Swing Priority) - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Pressure Reducing Valve (Medium Pressure) - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Pressure Reducing Valve - Remove and Install - Boom Priority
1.1. Assembly Procedure
- Install O-ring seals (16) to plugs (15).
Show/hide table
Illustration 2 g01211512 - Install plugs (15). Tighten plugs (15) to a torque of
74 ± 5 N·m (54 ± 4 lb ft) .Show/hide table
Illustration 3 g01211511 - Install seat (11) and nut (14) to plug (13). Tighten nut (14) to a torque of
17 ± 3 N·m (150 ± 27 lb in) . Install O-ring seal (12 ) to plug (13). Repeat for the remaining plug (13).Show/hide table
Illustration 4 g01211510 Show/hide table
Improper assembly of parts that are spring loaded can cause bodily injury.
To prevent possible injury, follow the established assembly procedure and wear protective equipment.
- Install spool (6), seat (7), stopper (8), spring (9), and plug assembly (10). Tighten plug assembly (10) to a torque of
128 ± 10 N·m (94 ± 7 lb ft) .Show/hide table
Illustration 5 g01211507 Show/hide table
Illustration 6 g01211508 Show/hide tableImproper assembly of parts that are spring loaded can cause bodily injury.
To prevent possible injury, follow the established assembly procedure and wear protective equipment.
- Install spool (2), seat (3), stopper (4), spring (5), and plug assembly (1). Tighten plug assembly (1) to a torque of
128 ± 10 N·m (94 ± 7 lb ft) .
Show/hide table
| |
| Illustration 1 | g01211513 |
End By:
- Install the pressure reducing valve.
Information System:
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Pressure Reducing Valve (Implement and Swing Priority) - Disassemble
Clutch Ring Gears For Power Shift Transmissions for Certain Models {3030, 3155}
C7.1 Industrial Engine
Pressure Sensor (DPF) - Remove and Install - Clean Emissions Module
C7.1 Industrial Engine
Air Compressor - Remove and Install - Twin Cylinder Compressor
C7.1 Industrial Engine
Air Compressor - Remove and Install - Single Cylinder
C7.1 Industrial Engine
Accessory Drive - Remove and Install - Accessory Drive SAE "A"
C7.1 Industrial Engine
Accessory Drive - Remove and Install - Accessory Drive SAE "B"
C4.4 Industrial Engine
Crankshaft
349F and 352F Excavators Machine Systems
Pilot Valve (Travel) - Remove and Install
349E Excavator Hydraulic System
Boom Drift Reduction Valve
Cat Detect 12 Radar Object Detection System, Software Version 3
Safety
Cat Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks
Regulatory Compliance
349F and 352F Excavators Machine Systems
Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Assemble
C9.3 Tier 4 Final Engines
Exhaust Manifold
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Auxiliary Pilot Valve (Straight Travel) - Remove and Install
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
349E Excavator Hydraulic System
Oil Makeup (Swing System)
349F and 352F Excavators
Bucket - Remove and Install
C7.1 Industrial Engine and Generator Set
Engine Vibration Is Excessive
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Hydraulic Tank - Disassemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Hydraulic Tank - Assemble
Procedure to Check Bolts on the Rotator of Certain Multi-Processors{6326}
Procedure to Check bolts on the Rotator of Certain Multi-Processors{6326}