EPC Parts Catalogs

C15 and C18 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install Caterpillar


  1. Home
  2. Disassembly and Assembly
  3. #82375
Vibration Damper and Pulley - Remove and Install
`
C15 and C18 Engines for Caterpillar Built Machines [UENR0132]
C15 and C18 Engines for Caterpillar Built Machines Exhaust Elbow - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines DEF Injector and Mounting - Remove and Install
BASIC ENGINE
DAMPER GP
C15 and C18 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Show/hide table
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     -     Guide Bolt
5/8 - 18 NF by 7 inch    		 1    
B     4C-5593     Thread Lubricant     -    

Show/hide table
NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

    Show/hide table

    Illustration 1g02160891

  1. Remove bolts (1) and remove guard (2) .

  1. Release the tension on the belt tensioner in order to position belt (3) out of the way.

  1. Remove bolts (4) and remove pulley (5) .
    Show/hide table

    Illustration 2g02160924

  1. Remove one bolt (6) and install Tooling (A) .

  1. Remove remaining bolts (6) . Use two people in order to remove vibration damper assembly (7) . The weight of vibration damper assembly (2) is approximately 46 kg (100 lb).
    Show/hide table

    Illustration 3g02161096

  1. Remove bolts (10) and remove spacer (9) .

  1. Separate damper (7) from adapter (8) .

Installation Procedure

  1. Install vibration damper (7) in the reverse order.

    1. Apply Tooling (B) to bolts (6) .

    1. Tighten bolts (6) to a torque of 270 ± 40 N·m (200 ± 30 lb ft).

Information System:

390D Excavator Hydraulic System Counterweight (Removal and Installation Hydraulic System)
390D Excavator Hydraulic System One-Way Flow Hydraulic System
329E Excavator Declaration of Conformity
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Declaration of Conformity
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Plate Locations and Film Locations
Weld Repair and Rework Procedures for the GLL Grapple Head {0679, 6307, 6700}
374D Excavator Hydraulic System Combined Function Hydraulic System
324E Excavator Boom/Stick/Bucket Combinations
325 VM and VH Variable Gauge Undercarriage Recoil Spring - Assemble
325 VM and VH Variable Gauge Undercarriage Recoil Spring - Disassemble
2010/06/02 An Improved Horn Button is Now Used On Certain CAT Product {7332, 7402}
2010/06/09 An Improved 3.9 Meter Stick is Now Available for 330D and 336D Excavators {6502}
315D and 318D Excavators Machine System Specifications Boom - 5.1 m (16.73 ft)
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
349F and 352F Excavators Machine System Specifications Window Wiper and Washer
329E Excavator Boom/Stick/Bucket Combinations
M300D Wheeled Excavator Transmission Speed Sensor Causes Error Codes{3030}
329E Excavator Specifications
Idler Oil Fill Volume {4159, 4159}
C13, C15, and C18 Tier 4 Interim Engines Cat ET Service Features
374D Excavator Hydraulic System Relief Valve (Swing)
C4.4 Industrial Engine Air Inlet and Exhaust System - Inspect
374F Excavator Hydraulic System Travel Motor
C9.3 Engines for Caterpillar Built Machines Unit Injector - Remove