Track - Connect
`
320 VH and VM Variable Gauge Undercarriage
[KENR8183]
320 VH and VM Variable Gauge Undercarriage
Track - Separate
320 VH and VM Variable Gauge Undercarriage
Final Drive - Remove and Install - VH Undercarriage
1.1. Connection Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 260-9412 | Chain As | 1 |
| B | 5P-6214 | Track Block Assembly | 1 |
- Use Tooling (A) to raise the track into position.
- Install pin (4) and cotter pin (3).
Show/hide table
Illustration 3 g01167154 - Install track shoe (2) and bolts (1). Tighten bolts (1) to a torque of
400 ± 70 N·m (295 ± 52 lb ft) . Tighten bolts (2) by an additional 120 degrees.Show/hide table
Illustration 4 g01174955 - Remove Tooling (B) from both ends of the track assembly.
- Adjust the track tension. Refer to Operation and Maintenance Manual, "Track Adjust".
Show/hide table
| |
| Illustration 1 | g01167157 |
Show/hide table
| |
| Illustration 2 | g01167155 |
Information System:
320 VH and VM Variable Gauge Undercarriage
Track - Separate
374D Excavator Hydraulic System
Oil Makeup (Swing System)
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Capacities (Refill)
374D Excavator Hydraulic System
Return Hydraulic System
C9.3 Engines for Caterpillar Built Machines
Unit Injector - Install
318E Excavator
Additional Messages
320E and 323E Excavators
Safety Messages
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Stopping the Engine
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Air Conditioning and Heating Control
C9.3 Engines for Caterpillar Built Machines
Unit Injector - Remove
374F Excavator Hydraulic System
Travel Motor
C4.4 Industrial Engine
Air Inlet and Exhaust System - Inspect
374F Excavator Hydraulic System
Displacement Change Valve
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Main Control Valve - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Main Control Valve - Install
374F Excavator Hydraulic System
Travel Counterbalance Valve
325D and 329D Excavators
Lifting and Tying Down the Machine
C13, C15, and C18 Tier 4 Interim Engines
Engine Misfires, Runs Rough or Is Unstable
320E and 323E Excavators
Fuel System Secondary Filter - Replace
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Fuses - Replace
320 VH and VM Variable Gauge Undercarriage
Final Drive - Remove and Install - VH Undercarriage
374D Excavator Hydraulic System
Bypass Valve (Return)
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Hydraulic System Oil - Change
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators
Track Adjustment - Adjust