Main Control Valve - Install
`
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
[UENR0102]
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Main Control Valve - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Blade Cylinder - Remove and Install
HYDRAULIC SYSTEM
VALVE GP-CONTROL
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Main Control Valve - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Main Control Valve - Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Main Control Valve - Disassemble
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Main Control Valve - Assemble
1.1. Installation Procedure
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 138-7575 | Link Bracket | 2 |
- Install bracket (23) onto main control valve (20). Install bolts (22) .
Show/hide table
 | |
| Illustration 1 | g01222526 |
- Attach a suitable lifting device to main control valve (20). The weight of main control valve (20) is approximately 80 kg (175 lb). Install main control valve (20) and bolts (21) .
Show/hide table
 | |
| Illustration 2 | g01222522 |
- Connect hose assemblies (18) and (19) .
Show/hide table
 | |
| Illustration 3 | g01222512 |
- Connect hose assemblies (15), (16), and (17) .
Show/hide table
 | |
| Illustration 4 | g01222503 |
- Connect hose assembly (13) and hose assemblies (14) .
Show/hide table
 | |
| Illustration 5 | g01222495 |
- Connect hose assemblies (10), (11), and (12) .
Show/hide table
 | |
| Illustration 6 | g01222480 |
- Connect hose assemblies (5), (6), (7), (8), and (9) .
Show/hide table
 | |
| Illustration 7 | g01222457 |
- Connect hose assembly (3) and harness assembly (4). Install clamp (2). Connect hose assemblies (1) .
Show/hide table
 | |
| Illustration 8 | g02161475 |
- Fill the hydraulic oil tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
End By: Install the side hood. Refer to , "Hood - Remove and Install".
Information System:
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Main Control Valve - Remove
374F Excavator Hydraulic System
Displacement Change Valve
320 VH and VM Variable Gauge Undercarriage
Track - Connect
320 VH and VM Variable Gauge Undercarriage
Track - Separate
374D Excavator Hydraulic System
Oil Makeup (Swing System)
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Capacities (Refill)
374D Excavator Hydraulic System
Return Hydraulic System
C9.3 Engines for Caterpillar Built Machines
Unit Injector - Install
318E Excavator
Additional Messages
320E and 323E Excavators
Safety Messages
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Stopping the Engine
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Air Conditioning and Heating Control
374F Excavator Hydraulic System
Travel Counterbalance Valve
325D and 329D Excavators
Lifting and Tying Down the Machine
C13, C15, and C18 Tier 4 Interim Engines
Engine Misfires, Runs Rough or Is Unstable
320E and 323E Excavators
Fuel System Secondary Filter - Replace
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Fuses - Replace
320 VH and VM Variable Gauge Undercarriage
Final Drive - Remove and Install - VH Undercarriage
374D Excavator Hydraulic System
Bypass Valve (Return)
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Hydraulic System Oil - Change
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators
Track Adjustment - Adjust
390D Excavator Hydraulic System
Final Drive
374D Excavator Hydraulic System
Load Signal Reduction Manifold - Load Signal Diverter Solenoid Valve and Load Signal Reduction Valve
374D Excavator Hydraulic System
Check Valve (Return Makeup)