Final Drive - Remove and Install - VM Undercarriage
`
325 VM and VH <BR>Variable Gauge Undercarriage
[KENR8182]
325 VM and VH Variable Gauge Undercarriage
Recoil Spring - Assemble
325 VM and VH Variable Gauge Undercarriage
Final Drive - Disassemble
POWER TRAIN
DRIVE GP-FINAL
320 VH and VM Variable Gauge Undercarriage
Final Drive - Remove and Install - VH Undercarriage
325 VM and VH Variable Gauge Undercarriage
Final Drive - Remove and Install - VM Undercarriage
325 VM and VH Variable Gauge Undercarriage
Final Drive - Disassemble
325 VM and VH Variable Gauge Undercarriage
Final Drive - Assemble
1.1. Removal Procedure
2.1. Installation Procedure
Removal Procedure
- Position the machine onto suitable cribbing below the first roller. Ensure that the master pin is above the center line of the sprocket.
Show/hide table
 | |
| Illustration 1 | g02162038 |
- Use two people in order to remove cover (2). The weight of cover (2) is approximately 30 kg (65 lb). Remove bolts (1) and cover (2) .
Show/hide table
 | |
| Illustration 2 | g02162039 |
- Disconnect hose assemblies (4) .
Show/hide table
 | |
| Illustration 3 | g02162180 |
Show/hide table
 | |
| Illustration 4 | g02162040 |
- Remove bolts (3) and reposition valve assembly (3) .
- Attach a suitable lifting device to final drive (7). The combined weight of final drive (7) and the travel motor is approximately 435 kg (960 lb). Remove bolts (5). Remove final drive (7) and the travel motor as a unit.
- Remove bolts (9) and travel motor (8) .
Show/hide table
 | |
| Illustration 5 | g02162048 |
Installation Procedure
- Install final drive (7) in the reverse order of removal.
Information System:
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Swivel
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Hydraulic Rotator Oil Flow - Test
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Host Machine Pressure and Flow - Test
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Hydraulic Cylinder Cycle Time - Check
374D Excavator Hydraulic System
Fan Pump (Hydraulic and Radiator Cooling)
374D Excavator Hydraulic System
Hydraulic Tank and Filter
374D Excavator Hydraulic System
Swing Drive
374D Excavator Hydraulic System
Relief Valve (Cushion Crossover) - Anti-Reaction Valve
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Caterpillar Approved Work Tools
374D Excavator Hydraulic System
Check Valve (Return Makeup)
374D Excavator Hydraulic System
Load Signal Reduction Manifold - Load Signal Diverter Solenoid Valve and Load Signal Reduction Valve
390D Excavator Hydraulic System
Final Drive
374D Excavator Hydraulic System
Bucket Hydraulic System
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Track - Separate - Press Fit Master Pin
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Track - Connect - Press Fit Master Pin
315D and 318D Excavators Machine System Specifications
Bucket Cylinder
374D Excavator Hydraulic System
Boom Drift Reduction Valve
374D Excavator Hydraulic System
Stick Hydraulic System
374D Excavator Hydraulic System
Stick Drift Reduction Valve
345C UHD Excavator and 345C Mobile Hydraulic Power Unit
Maintenance Interval Schedule
2010/08/23
The Harness Mounting of the Liquid Level Switch on the Engine Oil Pan is Improved on Certain 345D Excavators {1302}
Hydraulic Quick Coupler
Quick Coupler Operation - Hydraulic Pin Grabber Quick Coupler (If Equipped)
C9.3 Engines for Caterpillar Built Machines
General Information
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Hydraulic System Air - Purge