Stick - Install
`
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
[UENR0102]
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Stick - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Load Control Valve (Boom Cylinder) - Remove and Install
IMPLEMENTS
STICK GP
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Stick - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Stick - Install
1.1. Installation Procedure
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 8S-7630 | Stand | 1 |
| 8S-7641 | Tube | 1 | |
| 8S-7615 | Pin | 1 | |
| D | 1P-0520 | Driver Gp | 1 |
- Lower the temperature of bearings (10), (11), and (12). Use Tooling (D) in order to install bearings (10), (11), and (12) into stick (7). Use Tooling (D) in order to install lip seal (13) .
Show/hide table
 | |
| Illustration 1 | g01233120 |
- Attach Tooling (B ) and a suitable lifting device to stick (7). The weight of stick (7) is approximately 91 kg (200 lb). Install stick (7) and any shims that were present during the removal procedure. Install pin assembly (9) and bolt (8) .
Show/hide table
 | |
| Illustration 2 | g01232813 |
- Attach a suitable lifting device to stick cylinder (4). The weight of the rod end of stick cylinder (4) is approximately 34 kg (75 lb). Raise the rod end of stick cylinder (4) into position. Install pin assembly (6) and bolt (5) .
Show/hide table
 | |
| Illustration 3 | g01232829 |
- Install bracket (3) and bolts (2). Repeat for the other side. Remove Tooling (A) .
Show/hide table
 | |
| Illustration 4 | g01232890 |
End By:
- Install the bucket cylinder. Refer to , "Bucket Cylinder - Remove and Install".
- Install the bucket linkage. Refer to , "Bucket Linkage - Remove and Install".
Information System:
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Stick - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Stick Cylinder - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Bucket Cylinder - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Bucket Linkage - Remove and Install
303E CR, 303.5E, 304E, 305.5E and 305E Mini Hydraulic Excavators Machine Systems
Blade - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Blade Cylinder - Remove and Install
390D Excavator Hydraulic System
Control Valve (Stick Lowering)
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Aftercooler - Remove and Install - High Altitude Arrangement
C9.3 Engines for Caterpillar Built Machines
Injector Solenoid - Test
C9.3 Engines for Caterpillar Built Machines
Acceleration Is Poor or Throttle Response Is Poor
C9.3 Engines for Caterpillar Built Machines
Power Is Intermittently Low or Power Cutout Is Intermittent
C9.3 Engines for Caterpillar Built Machines
Oil Consumption Is Excessive
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Load Control Valve (Boom Cylinder) - Remove and Install
2011/06/29
A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
C9.3 Engines for Caterpillar Built Machines
Configuration Parameters
C9.3 Tier 4 Interim Engines
Cooling Fan Reversing - Test
390D Excavator Hydraulic System
Control Valve (Boom Lowering)
C9.3 Engines for Caterpillar Built Machines
Sensor Signal (Analog, Active) - Test
C9.3 Engines for Caterpillar Built Machines
Sensor Signal (Analog, Passive) - Test
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Quick Coupler Operation - Mechanical Pin Grabber Quick Coupler (If Equipped)
S365C and S385C Demolition and Scrap Shears
Maintenance Interval Schedule
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0669, 0760, 0761, 3101, 3129, 3160, 7555}
C13, C15, and C18 Engines for Caterpillar Built Machines
Diagnostic Trouble Codes
C13, C15, and C18 Engines for Caterpillar Built Machines
Event Codes