Heating and Air Conditioning Unit - Install
`
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
[UENR0102]
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Heating and Air Conditioning Unit - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Blower Motor (Air Conditioner, Heater) - Remove and Install
OPERATOR STATION
AIR CONDITIONER GP
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Heating and Air Conditioning Unit - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Heating and Air Conditioning Unit - Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Blower Motor (Air Conditioner, Heater) - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Evaporator Coil - Remove and Install
1.1. Installation Procedure
Installation Procedure
- Install the heater and air conditioning unit (22). Install bolts (21).
Show/hide table
![]() | |
Illustration 1 | g01225990 |
- Connect cable assembly (20) .
Show/hide table
![]() | |
Illustration 2 | g01225907 |
- Connect cable assembly (17). Connect hoses (18) and (19) .
Show/hide table
![]() | |
Illustration 3 | g01225887 |
- Connect harness assemblies (15) and (16). Connect hose assemblies (13) and (14) .
Show/hide table
![]() | |
Illustration 4 | g01225888 |
- Connect harness assembly (12) .
Show/hide table
![]() | |
Illustration 5 | g01225885 |
- Install cover (11) and screw (10) .
Show/hide table
![]() | |
Illustration 6 | g01225971 |
- Install duct (9) and screws (8) .
Show/hide table
![]() | |
Illustration 7 | g01225966 |
- Install louvers (7) .
Show/hide table
![]() | |
Illustration 8 | g01225961 |
- Install screw (6) .
Show/hide table
![]() | |
Illustration 9 | g01225883 |
- Install louver (5) .
Show/hide table
![]() | |
Illustration 10 | g01225911 |
- Install cover (3). Install screws (4) .
Show/hide table
![]() | |
Illustration 11 | g01225910 |
- Install cover (2) and screws (1) .
Show/hide table
![]() | |
Illustration 12 | g01225909 |
- Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
- Charge the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct tools.
Information System:
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Heating and Air Conditioning Unit - Remove
C9.3 Engines for Caterpillar Built Machines
Engine Shutdown While Idling
C9.3 Engines for Caterpillar Built Machines
Intake Manifold Air Pressure Is Low
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
C9.3 Engines for Caterpillar Built Machines
Intake Manifold Air Temperature Is High
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Support (Swing Boom) - Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Support (Swing Boom) - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Boom - Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Boom - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Swing Boom Cylinder - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Boom Cylinder - Remove and Install
C13, C15, and C18 Engines for Caterpillar Built Machines
Event Codes
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Blower Motor (Air Conditioner, Heater) - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Evaporator Coil - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Sprocket - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Recoil Spring - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Fuel Pressure Is High
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Final Drive and Travel Motor - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Final Drive and Travel Motor - Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Final Drive and Travel Motor - Disassemble
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Final Drive and Travel Motor - Assemble
C9.3 Engines for Caterpillar Built Machines
Fuel Pressure Is Low
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Swivel - Disassemble
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Swivel - Assemble