303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Install Caterpillar

Installation Procedure

Show/hide table



Illustration 1	g01228859

Show/hide table



Illustration 2	g01228482

Show/hide table



Illustration 3	g01228269

1. Attach Tooling (A) and a suitable lifting device to the swing motor and swing drive (2). The weight of the swing motor and swing drive (2) is approximately 61 kg (135 lb). Install the swing motor and swing drive (2). Apply Tooling (B) to bolts (3). Install bolts (3). Tooling (C) may be used in order to aid in the installation of the swing motor and swing drive (2) .

Show/hide table



Illustration 4	g01228268

2. Connect hose assemblies (1) and (3) to the rear and from the left side of swing motor (2) .

End By: Install the platform. Refer to , "Platform - Install".