303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Heater Core - Remove and Install Caterpillar


Heater Core - Remove and Install
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Start By:

  1. Remove the heating and air conditioning unit. Refer to, "Heating and Air Conditioning Unit - Remove".



    Illustration 1g01226030

  1. Remove screws (1) and clips (2) .



    Illustration 2g01226032

  1. Remove heater core (3) .

Installation Procedure




    Illustration 3g01226032

  1. Install heater core (3) .



    Illustration 4g01226030

  1. Install clips (2) and screws (1) .

End By: Install the heating and air conditioning unit. Refer to Disassembly and Assembly, "Heating and Air Conditioning Unit - Install".

Information System:

303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Remove
S365C and S385C Demolition and Scrap Shears Safety Messages
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Swivel - Assemble
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Swivel - Disassemble
C9.3 Engines for Caterpillar Built Machines Fuel Pressure Is Low
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Final Drive and Travel Motor - Assemble
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Final Drive and Travel Motor - Disassemble
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Final Drive and Travel Motor - Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Final Drive and Travel Motor - Remove
C9.3 Engines for Caterpillar Built Machines Fuel Pressure Is High
303.5E2, 304E2, 305E2 and 305.5E2 Mini Excavator Machine Systems Track Roller - Remove and Install
303.5E2, 304E2, 305E2 and 305.5E2 Mini Excavator Machine Systems Track - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Disassemble
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Assemble
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Main Hydraulic Pump - Remove
S365C and S385C Demolition and Scrap Shears Specifications
C9.3 Engines for Caterpillar Built Machines Sensor Supply - Test
303E CR, 303.5E, 304E, 305.5E and 305E Mini Hydraulic Excavators Machine Systems Main Hydraulic Pump - Disassemble
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Main Hydraulic Pump - Assemble
C9.3 Engines for Caterpillar Built Machines Electrical Power Supply - Test
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Control Manifold (Pilot Oil) - Disassemble - Hydraulic Lockout, Swing Brake and Travel
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems Control Manifold (Pilot Oil) - Assemble - Hydraulic Lockout, Swing Brake and Travel