Improved Software is Available to Re-Flash the Monitor Software for Certain 307E2 Tier 4 Final Mini Hydraulic Excavators {7490, 7601, 7603, 7610, 7620} Caterpillar


`
Improved Software is Available to Re-Flash the Monitor Software for Certain 307E2 Tier 4 Final Mini Hydraulic Excavators {7490, 7601, 7603, 7610, 7620} [M0067110]
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-MACHINE
Improved Software is Available to Re-Flash the Monitor Software for Certain 307E2 Tier 4 Final Mini Hydraulic Excavators {7490, 7601, 7603, 7610, 7620}
Mini Hydraulic Excavator
307E2 (S/N: KC91-UP)

Description Of Change: The Improved software is now used on the machines listed above. The improved software corrects a monitor issue with the pitch and roll sensors.

Adaptable To: The improved procedure is adaptable to machines and effective in production with machines that are listed in Table 1.

Table 1
Sales Model  Adaptable to Machines  Effective in Production with Machines 
307E2  S/N:KC9106-115,119-124,129-132,134  S/N:KC91-105,116-118,125-128,133,135-UP 

Use the following procedure to update the adaptable machines that are listed above using the improved monitor software:

Machine Preparation

Table 2
Required Parts List 
Item  Part Number  Part Description 
495-8615  Monitor Software 

  1. Download the flash file 495-8615 from SIS Web.

    Note: Go to SIS Web to make sure that the new Flash File part number is still the latest Flash File part number. A newer Flash File part number may be available. SIS Web only displays the latest available flash file. The new software is available in the form of a flash file through AVSpare Service Information System (SIS).



    Illustration 1g00666865

  2. Park machine on level ground with the implements lowered. Leave the ignition key to on. Refer to Illustration 1

    Note: Refer to SEBU9353 , "307E2 Mini Hydraulic Excavator" Operation and Maintenance Manual , System Pressure Release to release the system pressure.

Procedure



    Illustration 2g06023024

  1. Connect to the machine using Cat Electronic Technician (ET).

    Note: UseCat ET version 2013B and above.

    Note: Refer to Illustration2 for message. Select "OK".



    Illustration 3g06023039

  2. Select "Monitor System" (1). Select the "Upload" icon (2).


    Illustration 4g06023069

  3. Select "NO" for ECM replacement.


    Illustration 5g06023080

  4. Select "Cab Display" and the "Upload" icon.


    Illustration 6g06023096

  5. Upload the correct part number "4958615.FL2". Select "Begin Flash" to start the flash process.


    Illustration 7g06023136

  6. After the file upload is completed, exit Cat ET.

  7. Check the machine monitor display pitch angle on the monitor display.

Information System:

An Improved Routing is Now Used for the Pilot Hose on Certain 336D2 and 340D2 Excavators {5057, 5059}
GSV520 and GSV525 Orange Peel Grapples Head Assembly and Bushing - Remove and Install
816K Landfill Compactor Transmission Magnetic Screen - Clean
C9.3 Tier 4 Final Engines Cylinder Head Valves
415F2 Industrial Loader Machine Systems Refrigerant Accumulator - Remove and Install
415F2 Industrial Loader Machine Systems Cab - Install
415F2 Industrial Loader Machine Systems Cab - Remove
415F2 Industrial Loader Machine Systems Canopy - Remove and Install
415F2 Industrial Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
415F2 Industrial Loader Machine Systems Steering Wheel - Remove and Install
415F2 Industrial Loader Machine Systems Steering Metering Pump - Remove and Install
320D2 GC Excavator Engine Supplement Engine - Remove and Install
An Improved Air Conditioning Compressor Is Used On Certain Wheeled Excavators {1152, 1802}
320D2 GC Excavator Engine Supplement Radiator and Hydraulic Oil Cooler - Remove and Install
320D2 GC Excavator Engine Supplement Radiator - Remove and Install
Replacement Procedure for the Return Hose Assemblies on Certain 308E2 Excavators {5057, 5068}
320D2 GC Excavator Engine Supplement Hydraulic Oil Cooler - Remove and Install
415F2 Industrial Loader Machine Systems Air Conditioner and Heater - Remove and Install
415F2 Industrial Loader Machine Systems Fuel Tank - Remove and Install
307E2 Mini Hydraulic Excavator Machine Systems Refueling Pump - Remove and Install
Installing the <NOBR>387-6451</NOBR> Ride Control Kit to a Machine That Has an ECM {5004}
Installing the <NOBR>387-6450</NOBR> Ride Control Kit to a Machine That Does Not Have an ECM {5004}
C9.3 Tier 4 Final Engines Fuel Injection Pump
C9.3 Tier 4 Final Engines Cylinder Head