New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
[M0067446]
WORK TOOLS
BUCKET GP
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
- Excavator
- All Excavators Using K130 and K150 Adapters
- All Excavators using K110 Adapters
- All Excavators using K170 Adapters
- All Excavators using K110 Adapters
- Wheel Loader
- All Wheel Loaders using K110 Adapters
- All Wheel Loaders using K130 and K150 Adapters
- All Wheel Loaders using K170 Adapter
- All Wheel Loaders using K130 and K150 Adapters
The new adapters have changed materials used to provide a more robust adapter with improved resistance to breakage from impact loading.
Replace the broken or worn out adapter with the part number found in Table 1 and 2.
Show/hide table
| Adapter Size | K110 | K130 | K150 | K170 | ||||
|---|---|---|---|---|---|---|---|---|
| Base Edge Thickness | 60 mm | 70 mm | 80 mm | 90 mm | ||||
| Base Edge Bevel Angle | 22.5° | 22.5° | 22.5° | 35° | ||||
| Part Number Version | OLD | NEW | OLD | NEW | OLD | NEW | OLD | NEW |
| Hex - CTR | ||||||||
| Hex Corner RH (4 Degree Kick Out) | ||||||||
| Hex Corner LH (4 Degree Kick Out) | ||||||||
| Hex Corner RH (5 Degree Kick Out) | ||||||||
| Hex Corner LH (5 Degree Kick Out) | ||||||||
Show/hide table
| Adapter Size | K110 | K130 | K150 | K170 | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Base Edge Thickness | 51 mm | 63.5 mm | 70 mm | 76 mm | 90 mm | |||||
| Base Edge Bevel Angle | 22.5° | 22.5° | 22.5° | 22.5° | 35° | |||||
| Part Number Version | OLD | NEW | OLD | NEW | OLD | NEW | OLD | NEW | OLD | NEW |
| LDR Two Strap - Ctr | ||||||||||
| LDR Two Strap RH | ||||||||||
| LDR Two Strap LH | ||||||||||
| Base Edge Thickness | 51 mm | 63.5 mm | 70 mm | |||||||
| Part Number Version | OLD | NEW | OLD | NEW | OLD | NEW | ||||
| LDR Two Strap CTR | ||||||||||
| LDR Two Strap RH | ||||||||||
| LDR Two Strap LH | ||||||||||
| Base Edge Thickness | 63.5 mm | 70 mm | 90 mm | |||||||
| Base Edge Bevel Angle | 35° | 35° | 35° | |||||||
| LDR Abrasion CTR | 478–2543 |
|||||||||
| LDR Abrasion Corner | ||||||||||
Information System:
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders
Shipping
Improved Diesel Oxidation Catalyst (DOC) Is Used On Certain D Series Wheeled Excavators {1091}
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems
Control Valve
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems
Air Conditioner Lines
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems
Air Conditioner Lines
340F Excavator
Boom/Stick/Bucket Combinations
415F2 Industrial Loader Power Train
Tire and Rim (Rear) - Remove and Install
340F Excavator
Safety Messages
415F2 Industrial Loader Power Train
Tire and Rim (Front) - Remove and Install
415F2 Industrial Loader Power Train
Axle Housing (Service Brakes, Differential and Bevel Gear) - Assemble
415F2 Industrial Loader Power Train
Axle Housing (Service Brakes, Differential and Bevel Gear) - Disassemble
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
Condition Switch (Switch to Ground) - Test
C9 Engines for Caterpillar Built Machines
Cylinder Head Valves
C9 Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
349F XE and 352F XE Excavators
Engine Oil Level - Check
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train
Track
323F Excavator
Maintenance Interval Schedule
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train
Idlers (Track)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train
Piston Motor (Propel)
An Improved Radiator is Now Used for Certain 300.9D, 301.4C, 302.7D CR Mini Hydraulic Excavators {1353, 1380}
Inspection and Rework Procedure for Swing Bearing Bolted Joint on Certain 305.5E and 306E Mini Hydraulic Excavators {7063}
Improved Electrical Grounding is Now Used on Certain 308E2 CR Mini Hydraulic Excavators {1408, 7301}
Installation Procedure for Auxiliary Relief Valves on Certain 308E2 CR Mini Hydraulic Excavators with an Updated Main Control Valve {5069, 5117}