A New Upper Frame Design is Now Used for Improved Magnet Cable Routing on Certain 320E Excavators {1408, 7051}
[M0068090]
ELECTRICAL AND STARTING SYSTEM
WIRING GP
A New Upper Frame Design is Now Used for Improved Magnet Cable Routing on Certain 320E Excavators {1408, 7051}
- Excavator
- 320E (S/N: LAK1-UP)
Description Of Change: The upper frame assembly has been updated on the machines that are listed above. The new upper frame assembly has an extra hole to change the magnet cable routing to prevent interference with the machine harness. A new clip that secures the machines harness is also used. The new clip prevents the harness from moving freely.
Adaptable To: The part number for the improved 381-3409 Upper Frame As will remain the same. The new 4K-8864 Clip is a direct replacement for the former 8M-2773 Clip. Refer to the following illustrations for the new and former upper frame and cable routing along with the location of the new clip.
Show/hide table
| Effectivity and Adaptability of the New Upper Frame Design and Improved Magnet Cable Routing | ||
|---|---|---|
| Sales Model | Effectivity | Adaptability |
| 320E | S/N:LAK321-UP | S/N:LAK1-320 |
Show/hide table
| |
| Illustration 1 | g06034063 |
|
New upper frame and cable routing | |
Show/hide table
| |
| Illustration 2 | g06034106 |
|
Former upper frame and cable routing (1) Magnet cable | |
Show/hide table
| |
| Illustration 3 | g06034138 |
|
Clip location (2) | |
Information System:
Tiltable Ditch Cleaning Buckets
Work Tool Installation and Removal
Tiltable Ditch Cleaning Buckets
Safety Messages
GSV520 and GSV525 Orange Peel Grapples
Hydraulic Cylinder - Assemble
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
Determining Diagnostic Trouble Codes
329F and 330F Excavators Hydraulic System
Auxiliary Pump Flow - Test
303.5E2 CR, 304E2 CR, 304.5E2 XTC, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Hydraulic System
Relief Valve (Pilot) - Test and Adjust
538 Forest Machine Machine Systems
Engine Performance - Test - Engine Speed
325F Excavator Engine Supplement
Refrigerant Condenser and Mounting - Remove and Install
303.5E2 CR, 304E2 CR, 304.5E2 XTC, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Hydraulic System
Cylinder Speed - Check
303.5E2 CR, 304E2 CR, 304.5E2 XTC, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Hydraulic System
Cylinder Drift - Check
303.5E2 CR, 304E2 CR, 304.5E2 XTC, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Hydraulic System
Swing Speed and Overswing on Level Ground - Check
303.5E2 CR, 304E2 CR, 304.5E2 XTC, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Hydraulic System
Travel on Level Ground - Test - Optional Test
Installation Procedure for Front Mounted IT Quick Couplers on Certain 427F2, 428F2, and 434F2 Backhoe Loaders {6129}
336D 2L and 340D 2L Excavators Machine Systems
Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Remove and Install
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
Event Codes
558 Forest Machine Machine Systems
Solenoid Valve (Proportional Reducing) - Calibrate - Power Shift Pressure
558 Forest Machine Machine Systems
Relief Valve (Main) - Test and Adjust
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems
Differential
336D 2L and 340D 2L Excavators Machine Systems
Main Control Valve - Remove and Install
538 Forest Machine Machine Systems
Swing Motor - Test - Measurement of Case Drain Oil
Procedure for Reinforcing Bracket As on Certain M Series Motor Graders {6158, 6159}
Debris in Oil System Causing Repeat Failures of the (HEUI) Pump for Certain C7 and C9 Engines. {1126, 1251, 1318, 1378}
325F Excavator Engine Supplement
Diesel Exhaust Fluid Pump - Remove and Install
538 Forest Machine Machine Systems
Relief Valve (Swing) - Test and Adjust