2001/10/15 Correction to Disassembly and Assembly , "Swing Frame" and Disassembly and Assembly , "Swing Cylinder" {6506} Caterpillar

Correction to Disassembly and Assembly , "Swing Frame" and Disassembly and Assembly , "Swing Cylinder" {6506}

2001/10/15 [SEPD0600]

2001/10/15 An Improved Bucket Lever Will Increase Service Life {5063}

2001/10/15 A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}

FRAME AND BODY

FRAME GP

2001/10/15 Correction to Disassembly and Assembly , "Swing Frame" and Disassembly and Assembly , "Swing Cylinder" {6506}

Backhoe Loader:
416B (S/N: 8SG1-UP; 8ZK1-UP)
416C (S/N: 1WR1-UP; 1XR1-UP; 4ZN1-UP; 5YN1-UP)
416D (S/N: BFP1-UP; BGJ1-UP; BKG1-UP)
420D (S/N: BKC1-UP; BLN1-UP; BMC1-UP; FDP1-UP)
424D (S/N: BGP1-UP; BKR1-UP)
426B (S/N: 5YJ1-UP; 6KL1-UP)
426C (S/N: 1CR1-UP; 1ER1-UP; 1MR1-UP; 1NR1-UP; 1YR1-UP; 1ZR1-UP; 6XN1-UP; 7WN1-UP)
428B (S/N: 7EJ1-UP)
428C (S/N: 2CR1-UP; 8RN1-UP)
428D (S/N: BLL1-UP; BMT1-UP; BNB1-UP; BNS1-UP)
430D (S/N: BML1-UP; BNK1-UP)
432D (S/N: BLD1-UP)
436B (S/N: 6MJ1-UP; 7FL1-UP)
436C (S/N: 1FR1-UP; 1GR1-UP; 1PR1-UP; 1RR1-UP; 2AR1-UP; 2BR1-UP; 8TN1-UP; 9JN1-UP)
438B (S/N: 3KK1-UP)
438C (S/N: 1JR1-UP; 1TR1-UP; 2DR1-UP; 9KN1-UP)
438D (S/N: BPE1-UP; BPN1-UP)
442D (S/N: BRG1-UP; BRY1-UP)
446B (S/N: 5BL1-UP)
Disassembly and Assembly, SENR5812, "416B, 426B, 428B, 436B, and 438B Backhoe Loader Machine Systems", Page 73, "Swing Frame". This manual is part of the Service Manual, SENR5800.Disassembly and Assembly, SENR5812, "416B, 426B, 428B, 436B, and 438B Backhoe Loader Machine Systems", Page 48, "Swing Cylinders". This manual is part of the Service Manual, SENR5800.Disassembly and Assembly, SENR1209, "416C, 426C, 428C, 436C, and 438C Backhoe Loader Machine Systems", Page 150, "Swing Frame". This manual is part of the Service Manual, SENR1200.Disassembly and Assembly, SENR1209, "416C, 426C, 428C, 436C, and 438C Backhoe Loader Machine Systems", Page 122, "Swing Cylinders". This manual is part of the Service Manual, SENR1200.Disassembly and Assembly, RENR3585, "416D, 420D, 424D, 428D, 430D, 432D, 438D, and 442D Backhoe Loader Machine Systems", Page 110, "Swing Frame". This manual is part of the Service Manual, SENR3570.Disassembly and Assembly, RENR3585, "416D, 420D, 424D, 428D, 430D, 432D, 438D, and 442D Backhoe Loader Machine Systems", Page 108, "Swing Cylinders". This manual is part of the Service Manual, SENR3570.Disassembly and Assembly, SENR3978, "446 and 446B Backhoe Loader Machine Systems", Page 106, "Swing Frame". This manual is part of the Service Manual, SENR3965.Disassembly and Assembly, SENR3978, "446 and 446B Backhoe Loader Machine Systems", Page 107, "Swing Cylinders". This manual is part of the Service Manual, SENR3965.

The Disassembly and Assembly, "Swing Frame" service manual does not call out the torque of the 8T-3652 Nut which retains the 130-0484 Pin on the swing frame during installation.

The torque of the 8T-3652 Nut ... 1250 ± 135 N·m (922 ± 100 lb ft)

Also, the Disassembly and Assembly, "Swing Cylinders" service manual does not call out the torque of the six 114-6099 Bolts which retain the 9R-7701 Cap As during installation.

The torque of the six 114-6099 Bolts ... 400 ± 60 N·m (295 ± 44 lb ft)

Note: When the proper torque has been reached, tighten the 114-6099 Bolts to an additional 120 ± 5 degrees.