New Gauges Available {7450}
`
2010/07/08
[SEPD1148]
OPERATOR STATION
INDICATOR GP
2010/07/08
New Gauges Available {7450}
- AVSpare Products:
- All
Description of Change: New argon gas filled gauges are available through the parts department. The new gauges are sealed to keep moister out of the gauges.
Formerly, gauges with vents have been used. The vents in the gauges let moisture into the gauge. The moisture could make made the gauge difficult to read and caused corrosion in the gauge.
Adaptable To: The new gauges are direct replacements for the former gauges that are shown in table 1. A 6V-3507 Rectangular Seal must be ordered with each new gauge.
Show/hide table
| New Part Number | Description | Former Part Number |
| 199-7954 | Oil Temperature Gauge Gp | 1W-0702 |
| 5M-1065 | Pressure Indicator | 1W-0705 |
| 200-5235 | Coolant Temperature Gauge Gp | 1W-0697 |
| 199-7952 | Converter Indicator | 1W-0701 |
| 1W-0703 | Pressure Indicator | 6N-3272 |
| 200-5233 | Coolant Temperature Gauge Gp | 1W-0698 |
| 200-5234 | Coolant Temperature Gauge Gp | 1W-5169 |
| 200-5234 | Coolant Temperature Gauge Gp | 1W-5170 |
| 1W-0708 | Air Pressure Gauge | 7N-8515 |
| 1W-5280 | Pressure Gauge | 8N-5211 |
| 1W-0703 | Pressure Indicator | 1W-0706 |
| 199-7952 | Converter Indicator | 1W-0701 |
| 199-7953 | Converter Indicator | 1W-3293 |
| 1W-0707 | Pressure Indicator | 1W-5168 |
Information System:
314D Excavator
Lifting and Tying Down the Machine - Spreader Bar
390D Excavator Hydraulic System
Main Hydraulic Pump
390D Excavator Hydraulic System
Solenoid Valve (Proportional Reducing) - Power Shift System
390D Excavator Hydraulic System
Solenoid Valve (Hydraulic Lockout)
Replacement Procedure for the Service Repair Parts on the Multi-Processor Crusher Jaws{6349}
374D Excavator Hydraulic System
Swing Pump - Test - Constant Horsepower Flow Control
S365C and S385C Work Tools
Gear and Bearing - Remove and Install
Procedure for Reworking the HVAC Ducts on Certain Forestry Machines{734D}
349F and 352F Excavators Machine System
Displacement Change Valve
2010/06/30
A Check Valve Kit is Now Available for the Air Cleaner Assembly on Certain Backhoe Loaders {1050}
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Sound Information and Vibration Information
374D Excavator Hydraulic System
Travel Motor - Test - Measurement of Case Drain Oil
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System
Hydraulic Pump - Test and Adjust
C9.3 Engines for Caterpillar Built Machines
Component Location
Installation Procedure for the 356-3680 Auxiliary Lines Group (Boom) {5057}
328D CR Excavator
Lifting and Tying Down the Machine - Rear Eyes and Front Eyes
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
E-Ceiling and Cab Avoidance - Troubleshoot - Troubleshooting
349F and 352F Excavators Machine System
Travel Counterbalance Valve
374D Excavator Hydraulic System
Gear Pump (Pilot) - Test
325D and 329D Excavators
Securing the Machine
C9.3 Engines for Caterpillar Built Machines
Timing - Calibrate
390D Excavator Hydraulic System
Pump Control (Main Hydraulic)
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
E-Fence - Set - Calibration
Installation Procedure for the 307-2964 Stick Lines Group on Certain 374D Excavators{5057}